70W Roof Mount Solar Attic Fan with A/C D/C Adapter

SKU
70W-HYBRID
   

The Attic Depot’s highest-capacity roof-mount solar attic fan with a pre-attached hybrid adapter for installations with significant shade or projects requiring evening operation. The fan uses solar power when available and can use electricity when solar power is unavailable and the attic reaches the temperature or humidity activation point. It delivers up to 3,850 CFM and is recommended for properly ventilated attics up to approximately 2,500 square feet.

OR

Product Files

Description

The Attic Depot 70W Roof-Mount Solar Attic Fan with Pre-Attached Hybrid Adapter delivers high-capacity attic ventilation with the added flexibility of electrical backup when solar power is unavailable.

This hybrid configuration is ideal when the fan must be installed in an area that receives significant shade or when the homeowner or contractor wants the fan to remain capable of operating during the evening. It is also a strong choice for large attics that require substantial airflow beyond available daylight hours.

When adequate sunlight is available, the fan operates using power generated by its adjustable 70-watt solar panel. When solar power is unavailable, the pre-attached hybrid adapter allows the fan to draw electricity through a standard electrical connection.

The fan does not run continuously simply because it is plugged in. Its integrated thermostat and humidistat monitor conditions inside the attic. If the temperature or humidity reaches the activation point while solar power is unavailable, the fan can operate using electricity. This allows the fan to respond to excessive heat or humidity during shaded conditions, cloudy periods, or evening hours.

The 70W fan is The Attic Depot’s highest-capacity solar attic fan. Its variable-speed 24-volt brushless motor produces up to 3,850 CFM and is recommended for properly ventilated attics up to approximately 2,500 square feet.

The adjustable solar panel can be positioned toward stronger sunlight while allowing the fan to be placed where it can provide effective attic airflow. This model is particularly useful for large or complex attics and for roof configurations where two smaller fans may not fit properly.

The automatic thermostat activates the fan at approximately 85°F and shuts it off at approximately 70°F. The humidistat activates at approximately 75% relative humidity and shuts the fan off at approximately 60%.

The fan features whisper-quiet poly-vinyl blades, a corrosion-resistant powder-coated finish, a protective wildlife screen, and hail- and wind-resistant construction. It measures approximately 27.5 inches by 29 inches by 12.5 inches and is designed for professional roof-mount installation.

Because this fan moves a substantial volume of air, adequate intake ventilation is essential. Contractors should inspect soffit openings, insulation baffles, rafter channels, existing vents, attic configuration, shade, and solar exposure before selecting the installation location. If intake vents are blocked or undersized, the fan may not achieve its intended airflow.

Two smaller fans may provide better airflow distribution in some divided, elongated, or unusually configured attics. Final fan selection and placement should be based on a professional attic inspection rather than square footage alone.

The complete fan is protected by The Attic Depot’s lifetime warranty against manufacturing defects. Labor and installation expenses are not covered.

Why Choose the 70W Hybrid Model?

  • The attic requires higher-capacity ventilation.
  • One 25W or 30W fan will not provide sufficient airflow.
  • Two smaller roof-mounted fans will not fit properly.
  • The installation location receives significant shade.
  • Trees, rooflines, or nearby structures may limit direct sunlight.
  • The homeowner wants the fan to remain capable of operating during the evening.
  • The contractor wants electrical backup when solar power is unavailable.
  • Temperature and humidity response is needed beyond available daylight hours.
  • The contractor wants the hybrid adapter already attached before installation.

How the Hybrid System Works

  1. When adequate sunlight is available, the fan operates using solar power.
  2. The thermostat and humidistat monitor conditions inside the attic.
  3. When solar power is unavailable, the hybrid adapter provides access to electricity.
  4. If the attic reaches the temperature or humidity activation point, the fan operates using electricity.
  5. The fan shuts off when the attic reaches the applicable temperature or humidity shutoff point.

Product Features

  • Hybrid adapter already attached
  • Solar operation when adequate sunlight is available
  • Electrical backup when solar power is unavailable
  • Continued temperature and humidity response during shaded conditions or evening hours
  • Adjustable 70-watt solar panel
  • Up to 3,850 CFM
  • Recommended for attics up to approximately 2,500 square feet
  • The Attic Depot’s highest-capacity solar attic fan
  • Variable-speed 24-volt brushless motor
  • Automatic thermostat: approximately 85°F on and 70°F off
  • Automatic humidistat: approximately 75% on and 60% off
  • Whisper-quiet poly-vinyl blades
  • Corrosion-resistant powder-coated finish
  • Protective wildlife screen
  • Hail- and wind-resistant construction
  • Approximately 27.5" × 29" × 12.5"
  • Lifetime warranty on the complete fan against manufacturing defects
Specs
Related Products