The Attic Depot 30W Roof-Mount Solar Attic Fan with Pre-Attached Hybrid Adapter provides dependable attic ventilation in locations where solar exposure may be limited or where ventilation may be needed after daylight hours.
The hybrid adapter is especially useful when the fan must be installed in an area that receives a significant amount of shade or when the homeowner or contractor wants the fan to remain capable of operating during the evening.
When adequate sunlight is available, the fan operates using power generated by its solar panel. When solar power is unavailable, the hybrid adapter allows the fan to draw electricity from a standard electrical connection. The fan does not automatically run continuously simply because it is plugged in. Its integrated temperature and humidity controls determine when ventilation is needed. If the attic reaches the temperature or humidity activation point while solar power is unavailable, the fan can operate using electricity.
The fan’s adjustable 30-watt solar panel powers a variable-speed 24-volt brushless motor that delivers up to 1,550 CFM of airflow. It is recommended for properly ventilated attics up to approximately 1,500 square feet. The adjustable panel allows the installer to position it for improved solar exposure based on the roof’s orientation and available sunlight.
The automatic thermostat activates the fan at approximately 85°F and shuts it off at approximately 70°F. The humidistat activates at approximately 75% relative humidity and shuts the fan off at approximately 60%.
The low-profile fan features whisper-quiet poly-vinyl blades, a corrosion-resistant powder-coated finish, stainless-steel hardware, a protective wildlife screen, and hail- and wind-resistant construction. The 30W model is Florida and Texas Windstorm Certified and TAS-100 certified, making it well suited for installations in demanding high-wind regions.
The fan measures approximately 19 inches by 19 inches by 9 inches and is designed for professional roof-mount installation. Proper intake ventilation must be available to replace the air exhausted by the fan. Contractors should evaluate the attic layout, soffit ventilation, existing vents, roof configuration, shade, and available solar exposure before installation.
The complete fan is backed by The Attic Depot’s lifetime warranty against manufacturing defects. Labor and installation expenses are not covered.